| Primary Material |
Low-Protein Powder-Free Natural Rubber Latex with Synthetic Polymer Coating ≤2.0 milligrams/glove of powder in accordance with ASTM D6124 and ISO 21171 Caution: This product contains natural rubber latex which may cause allergic reactions, including anaphylactic responses. |
| Donning Agent |
Synthetic Polymer Coating (Inner surface coated for dry and damp hand donning) |
| Color |
White (Provides contrast when using a dark colored underglove) |
| Grip |
Lightly Textured (Ideal for procedures requiring exceptional grip) |
| Former (Mold) Design |
Anatomical, curved former designed to enhance comfort and reduce hand fatigue |
| Cuff Design |
Tapered, beaded cuff design to prevent rolldown. Reinforced material prevents tearing. |
| Chemical Additives (Accelerators) |
Zinc Diethyldithiocarbamate (ZDEC) and Zinc Dibutyldithiocarbamate (ZDBC) Residual chemical levels below detectable level according to UPB/P/003a test method |
| Leachable Protein (per EN455-3 using ASTM D5712 (Modified Lowry Protein Method) |
Low Protein: <50 micrograms/gram of total extractable protein Caution: Safe use of these gloves by or on latex-sensitized individuals has not been established. |
| Thickness (per ASTM D3577 ≥ 0.10 mm) |
Finger Tip 0.23 mm Cuff 0.14 mm |
| Cuff Length (per EN455-2 ≥ 270 mm size 7.5) |
300 mm |
| Force @ Break Before Accelerated Aging (per EN455-2 ≥ 9 N) |
Meets/Exceeds |
| Force @ Break After Accelerated Aging (per EN455-2 ≥ 9 N, 7 days 70°C in an oven) |
Meets/Exceeds |
| Elongation @ Break Before Accelerated Aging (per ASTM D3577 ≥ 750%) |
Meets/Exceeds |
| Elongation @ Break After Accelerated Aging (per ASTM D3577 ≥ 560%, 7 days 70°C in an oven) |
Meets/Exceeds |
| Freedom from Holes (per EN 455 AQL 1.5) |
0.65 AQL Final Inspection |
| Viral Penetration |
Tested and passed, in accordance with ASTM F 1671 |
| Chemical Resistance |
The resistance to some chemicals has been assessed in accordance with EN 374-3 Results and recommendations for use with chemicals can be obtained on request |
| Sterilization |
Gamma Radiation, Sterility Assurance Level 10-6 |
| Expiration Date |
35 Months from Date of Manufacture Manufacture and Expiration Dates are printed on packaging (YYYY-MM format) |
| Packaging |
Polyethylene peel pouch material protects product during transport and storage from moisture and ozone and prevents tearing when opening to maintain a sterile environment Long pack configuration for easier aseptic donning. |
| Storage Recommendations |
Protect from freezing. Avoid excessive heat. Keep dry. Product should be shielded from direct sunlight, fluorescent lighting, X-rays, moisture and ozone. Do not store in temperatures above 40°C. |
| Country of Origin |
Malaysia |
